Hi Y`all out there in
land.You might like to try this cheap alternative to help stop your visors "Misting up" :- Try a small drop of washing up liquid, spread on the inside of your visor, (neat, without water!) Apply with your finger(s) to a clean surface, then use a piece of kitchen roll, to lightly polish /remove smears.(It also works if you wear glasses). I`m an all weather rider, & have spent money on a variety of "Anti-Fog" products. And I find the washing up liquid works as well as them, (If not better) with no "Fogging". I usually apply it once a week. (Opening your visor 1 click also helps prevent "fogging", at lower speeds) Also :- You might like to try a product called "Clear View Rain Away" (Available from most car accessories shops) Or, "Rain X Plastic water repellent" (Available from "Halfrauds" @ £11.99) DON`T use ordinary Rain X on plastic visors, it makes them brittle ! You apply it to the OUTSIDE of your visor.(Again :- spray or apply a little onto clean visor, spread with finger(s),Then very lightly, polish/ remove smears with kitchen roll), Leaving some of the product on your visor. It helps to bead rain from your visor, therefore improving visibility. (If you get caught out by a shower whilst riding.) Another trick I use, (whilst doing more than 30 mph in the rain) is to briefly lower my gaze to the filler cap,(Ensuring the road ahead is clear), this helps the rain bead off better. Hope this helps your visibility / misting. Regards, Sircular. :thumbsup)