Page 1 of 1
Hazard Lights ?
Posted:
Sat Apr 29, 2017 6:03 pmby Sircular
Hi peeps, Has anyone installed a hazard light kit on their BB ? Just an idea I'm toying with. If so, where'd you get the kit, & did you use a bar mounted switch ? Did the kit come with clear instructions ? How easy/hard are they to fit ? Etc. Any help on this subject please. Thanks, regards, Sircular.
Re: Hazard Lights ?
Posted:
Sun Apr 30, 2017 10:18 amby T.Murphy aka Tim
No, I dont know of anyone thats done a mod like that even though a good few over the years have asked . There must be someone out there thats done it. Post it up if anyone finds a solution.
Re: Hazard Lights ?
Posted:
Sun Apr 30, 2017 6:02 pmby Coggy
At the risk of upsetting Timifee
My Deauville is fitted with hazard warning lights and it's of the same era as the later blackbirds
And it's a HONDA
Re: Hazard Lights ?
Posted:
Sun Apr 30, 2017 10:34 pmby T.Murphy aka Tim
Coggy wrote:At the risk of upsetting Timifee
My Deauville is fitted with hazard warning lights and it's of the same era as the later blackbirds
And it's a HONDA
Dunno why you think Id be upset
The Pans do as well as the Deauville. But Len has got a Blackbird.
Re: Hazard Lights ?
Posted:
Mon May 01, 2017 8:03 pmby Dark Angel
Try this - annyercan fook off, Murphy, if it "dunt work" fer thee...
https://www.autoelectricsupplies.co.uk/ ... tegory/132 
Re: Hazard Lights ?
Posted:
Tue May 02, 2017 10:32 pmby T.Murphy aka Tim
t
That looks interesting. h
However, theres a kit for LED lamps and theres a kit for ornery bulbs. My Bird has got ornery rear indicator lights and front LED indicators.
Re: Hazard Lights ?
Posted:
Wed May 17, 2017 1:27 amby Krisbiker
I've fitted a small latching switch inside the r/hand switch unit. This puts a supply to an led compatible flasher unit. The output from this feeds two diodes(end opposite the white bar mark). The outputs from these are teed into the left and right flasher feeds. Hardest part of the job was fitting the switch and feeding the wires to it
Re: Hazard Lights ?
Posted:
Sat Jul 08, 2017 1:27 pmby FIREDRAGON
- hazard2.JPG (8.26 KiB) Viewed 1786 times
This is the installation on my '03 BB. The left bar electrics are from the 1200 auto. I wanted the up/down gear switches and the hazard was a bonus. So based on that change the bar fitting for a model that has the Hazard switch.
Re: Hazard Lights ?
Posted:
Wed Aug 16, 2017 5:11 amby Sircular
Hi Mr FIREDRAGON. Firstly, what a great solution to my original post. Second, Sorry I haven`t replied earlier. OK, what I`d like to know is :- Which motorcycle did the l/h switch gear come from ? (What`s a 1200 Auto ?) Did you have to change any of the electrics/wiring, to get the desired "Hazard flashers" Thanks, kind regards, Sircular.