IXXRA......The Home Of The Superblackbird

Honda CBR1100 XX

Skip to content

Best Exhaust?

Selling any kit? Or are you looking for some Blackbird parts or bike gear?
Then put an advert on our Shop Window,
or if you want to trade/swap any items please put them here.


Moderators: MaXX2, wobbs

Post a reply

Best Exhaust?

Postby ned52 » Thu Sep 15, 2016 12:32 pm

Hi all,
I'm thinking of changing the cans on my exhaust and wondered what the best option is in your collective opinion.
Thanks
Ned
ned52
Annodised Alloy Member
Annodised Alloy Member
 
Posts: 28
Joined: Fri Aug 05, 2016 8:20 pm
Top

Re: Best Exhaust?

Postby Cyclops » Thu Sep 15, 2016 12:48 pm

Stick with the standard ones :thumbsup)
BANNED


Half blind and brain dead.
User avatar
Cyclops
Titanium Member
Titanium Member
 
Posts: 189
Joined: Fri Jun 20, 2014 1:46 am
Location: Never never land
Top

Re: Best Exhaust?

Postby T.Murphy aka Tim » Thu Sep 15, 2016 10:13 pm

+1, like he says.
Image


Its all shite
User avatar
T.Murphy aka Tim
Diamond Member
Diamond Member
 
Posts: 4835
Joined: Mon Aug 18, 2008 10:55 am
Location: Ystradgynlais on Sea
Top

Re: Best Exhaust?

Postby TRIPPO » Fri Sep 16, 2016 12:56 pm

Or get a set of blue flame evo's :thumbsup) :thumbsup) :thumbsup)
There,s only one good ride!!!!!
One that you return home safely from!!!!! Make sure you do!!!!!
Casualty is full of people who thought they new better

Regards John

Image
User avatar
TRIPPO
Diamond Member
Diamond Member
 
Posts: 1987
Joined: Sat Nov 08, 2008 12:55 am
Location: Coventry At the Weekends!!!! In the week....Fooooook no's
Top

Re: Best Exhaust?

Postby ned52 » Sat Sep 17, 2016 9:11 am

Cyclops wrote:Stick with the standard ones :thumbsup)


Hi,
I would but the right hand (off side) one has some damage, so if anyone has a pair of good condition
standard ones (bikes a 2007) or even just a right hand one please let me know.

Cheers all
Ned

ps or maybe after market ones.!!
ned52
Annodised Alloy Member
Annodised Alloy Member
 
Posts: 28
Joined: Fri Aug 05, 2016 8:20 pm
Top

Re: Best Exhaust?

Postby Sircular » Thu Nov 17, 2016 10:42 pm

Hi Ned, Try mikeyw64. He offered some cans to me earlier, this month,(In the "wippet inn"), but I got some elsewere. If you`re still after some &, he`s still got `em, give him a shout. Regards, Sircular. :thumbsup)
Sircular
Titanium Member
Titanium Member
 
Posts: 175
Joined: Mon Sep 23, 2013 12:38 pm
Location: Corby, Northamptonshire. U.K.
Top

Re: Best Exhaust?

Postby ned52 » Thu Nov 17, 2016 11:44 pm

Hi Sircular,
Thanks for that, but I'm sorted now.

Ned :thumbsup)

ps Fitted that radiator this week, had it's moments but all seems good.
ned52
Annodised Alloy Member
Annodised Alloy Member
 
Posts: 28
Joined: Fri Aug 05, 2016 8:20 pm
Top

Re: Best Exhaust?

Postby T.Murphy aka Tim » Thu Nov 17, 2016 11:47 pm

ned52 wrote:Hi Sircular,
Thanks for that, but I'm sorted now.

Ned :thumbsup)

ps Fitted that radiator this week, had it's moments but all seems good.



Hi ned. What moments? ( havent started on mine yet...be a while before I get around to it. )

:smile:
Image


Its all shite
User avatar
T.Murphy aka Tim
Diamond Member
Diamond Member
 
Posts: 4835
Joined: Mon Aug 18, 2008 10:55 am
Location: Ystradgynlais on Sea
Top

Re: Best Exhaust?

Postby ned52 » Fri Nov 18, 2016 12:26 am

Nothing major,
I had a leak on a threaded (?) aluminium tube that's connected to the rad neck via a rubber siphon hose ( 28
in the link below) going to the reserve thank, I was concerned about stripping the thread but managed to sort it with a bit of
P.T.F.E. tape and the cooling fan brackets where a bit out (and soft) so be careful if yours is the same.
http://www.lingshondaparts.com/honda...0&block_03=632
also the fan wiring plug/connector bracket was to big so just tie wrapped it onto bracket.

Hope it helps

Ned
ps Let us know how you get on
ned52
Annodised Alloy Member
Annodised Alloy Member
 
Posts: 28
Joined: Fri Aug 05, 2016 8:20 pm
Top

Re: Best Exhaust?

Postby T.Murphy aka Tim » Fri Nov 18, 2016 1:36 am

ned52 wrote:Nothing major,
I had a leak on a threaded (?) aluminium tube that's connected to the rad neck via a rubber siphon hose ( 28
in the link below) going to the reserve thank, I was concerned about stripping the thread but managed to sort it with a bit of
P.T.F.E. tape and the cooling fan brackets where a bit out (and soft) so be careful if yours is the same.
http://www.lingshondaparts.com/honda...0&block_03=632
also the fan wiring plug/connector bracket was to big so just tie wrapped it onto bracket.

Hope it helps

Ned
ps Let us know how you get on



Cheers Ned and will do :thumbsup)
Image


Its all shite
User avatar
T.Murphy aka Tim
Diamond Member
Diamond Member
 
Posts: 4835
Joined: Mon Aug 18, 2008 10:55 am
Location: Ystradgynlais on Sea
Top
Post a reply

Return to Shop Window & SwapShop

Who is online

Users browsing this forum: No registered users and 3 guests

Powered by phpBB® Forum Software © phpBB Group