IXXRA......The Home Of The Superblackbird

Hi all,
I'm thinking of changing the cans on my exhaust and wondered what the best option is in your collective opinion.
Thanks
Ned

Stick with the standard ones

+1, like he says.

Or get a set of blue flame evo's

Cyclops wrote:Stick with the standard ones

Hi,
I would but the right hand (off side) one has some damage, so if anyone has a pair of good condition
standard ones (bikes a 2007) or even just a right hand one please let me know.

Cheers all
Ned

ps or maybe after market ones.!!

Hi Ned, Try mikeyw64. He offered some cans to me earlier, this month,(In the "wippet inn"), but I got some elsewere. If you`re still after some &, he`s still got `em, give him a shout. Regards, Sircular.

Hi Sircular,
Thanks for that, but I'm sorted now.

Ned

ps Fitted that radiator this week, had it's moments but all seems good.

ned52 wrote:Hi Sircular,
Thanks for that, but I'm sorted now.

Ned

ps Fitted that radiator this week, had it's moments but all seems good.

Hi ned. What moments? ( havent started on mine yet...be a while before I get around to it. )

Nothing major,
I had a leak on a threaded (?) aluminium tube that's connected to the rad neck via a rubber siphon hose ( 28
in the link below) going to the reserve thank, I was concerned about stripping the thread but managed to sort it with a bit of
P.T.F.E. tape and the cooling fan brackets where a bit out (and soft) so be careful if yours is the same.
http://www.lingshondaparts.com/honda...0&block_03=632
also the fan wiring plug/connector bracket was to big so just tie wrapped it onto bracket.

Hope it helps

Ned
ps Let us know how you get on

ned52 wrote:Nothing major,
I had a leak on a threaded (?) aluminium tube that's connected to the rad neck via a rubber siphon hose ( 28
in the link below) going to the reserve thank, I was concerned about stripping the thread but managed to sort it with a bit of
P.T.F.E. tape and the cooling fan brackets where a bit out (and soft) so be careful if yours is the same.
http://www.lingshondaparts.com/honda...0&block_03=632
also the fan wiring plug/connector bracket was to big so just tie wrapped it onto bracket.

Hope it helps

Ned
ps Let us know how you get on

Cheers Ned and will do